KEZU Sand Fixing Agent

Product description

This product is environmentally friendly single-component water-based emulsion, mainly using high-grade polymer emulsion and additives as the main raw materials, secondary reaction to form a strong sealing and curing reinforced adhesive. This product has strong permeability, and can achieve the effect of penetration on the base surface of low strength, thoroughly strengthen the base and improve the hardness of the base. The film is resistant to temperature change, anti-contraction and anti-aging, and does not affect the strength of the product strengthened by thermal expansion and cold contraction and temperature changes. Under normal temperature state table dry 4 hours, work 24 hours; Low temperature state surface dry 8 hours, real work 48 hours.

(The above drying time is only the theoretical data of the experimental environment. In the actual environment, due to low temperature or high humidity, the drying time will be delayed, and the next process can be done after the film is completely dried.)

Scope of application

This product is suitable for the putty layer or cement mortar layer caused by low strength depowder, in the depth range of product penetration base, play a strengthening, sealing role, to prevent the putty or paint batch (brushing) in the depowder base appear empty, fall off, mold phenomenon.

The use of foundations such as: the concrete top layer after the putty is removed, the secondary renovation putty layer with low hardness and the inferior mortar base and other putty is not easy to stick; This product can also be used for the bottom protection of putty layer before pasting wallpaper, sealing and strengthening use.

Reference dosage

The theoretical brushing area is 8-10 square /KG(one pass), and the actual construction depends on the substrate, construction method and brushing thickness.

Construction method

1. This product is high solid content and high concentration type, it is recommended to dilute with water when using.
2. If the base surface used has peeling, puffy, empty or loose base surface has been painted with decorative paint, please dispose of the surface first, and then paint the product, otherwise it may bite the bottom and other phenomena.
3. Customers can adjust the solid content when using according to the degree of porosity of the base surface, it is generally recommended to add 1-2 times of water after use, diluted materials should be used up in time to avoid deterioration.
4. Good compatibility with cement mortar, ready to use, first dilute the raw material with water and then directly add cement sand to stir evenly.

Matters needing attention

1. This product should not be swallowed. If it comes into contact with eyes or sensitive parts of the body, wash immediately with water and seek medical attention immediately.
2. The temperature is below 5℃ or in the rain should not be constructed, do not construction in a particularly humid and unventilated environment, otherwise it will affect the film formation. Large area of construction before the local brush as film effect, film formation is good, transparent side can be subsequent construction.

Transport and storage

1.The storage place of this product should be ventilated, dark, dry, and the room temperature is 5℃-35℃.

2.Transport according to non-dangerous goods requirements. During transportation, prevent rain, exposure, extrusion, collision, inversion, and keep the package intact. The ambient temperature during transportation should not be lower than 0 ° C, otherwise insulation measures should be taken.

3.Cool and dry place, shelf life of 12 months under sealed condition, should not be stored after unpacking.